D 80:4L Black

Description

LAB Gruppen D 80:4L, 4-Channel Installation Amplifier, With a total power output of 8,000 W, Power output (all channels active): 2,000 W (2 / 2.67 / 4 ohm), 1,500 W (8 ohm), 750 W (16 ohm), 2,000 W (70 volts), 2,000 W (100 volts), Maximum single-channel power: 4,400 W (2 ohm), 5,900 W (2.67 ohm), 4,600 W (4 ohm), 2,300 W (8 ohm), 1,150 W (16 ohm), 3,300 W (70 volts), 4,700 W (100 V), Lake DSP and Dante audio network for network installations, Rational Power Management for flexible power distribution and optimal load balancing, Peak output voltage: 194 volts, Maximum output current: 67 Amps, ISVPL peak limiter with configurable voltage limit, Frequency response: 20 – 20,000 Hz, THD+N < 0.

04% (1 kHz, 1 dB below clipping), Load impedance analysis and pilot tone monitoring, Internal DSP: 48/96 kHz at 32-bit floating point, AES/analogue latency: 1.61 / 1.68 ms, Speaker processing: Classic / Linear-phase / FIR crossover, EQ, delay, limiter (Max Peak & RMS), MESA EG Raised-Cosine Filter for system tuning, Automatic 4-stage input redundancy, Inputs: Terminal block (analogue, AES3), RJ45 (Dante), Dante 8×8 I/O with redundant or daisy-chain topology, 48/96 kHz, latency 0.

25–5 ms, Analogue inputs with Iso-Float isolation, 96 kHz / 24-bit, THD+N down to 0.0000022, AES3 up to 192 kHz / 24-bit, Output connections via 2-pole terminal block connectors (up to 1,000 V / 76 A, up to 16 mm² cable cross-section), Two RJ45 ports for Lake controllers, Dante and third-party protocols, Lockable 250 V/32 A mains connection, Soft start, PFC > 0.98, R.

SMPS, BEL up to 15 A, PAL, UVL and comprehensive mains protection, Front panel with touch buttons for Power, Mute and Select, as well as status LEDs for chassis, temperature, power supply, channel load, amplifier and signal, Dimensions (W x D x H): 483 x 424 x 88 mm, Weight: 14.5 kg, Colour: Black / grey, Includes power cord